Optical fiber jumper according to the different transmission media can be divided into common silicon fiber single-mode, multi-mode jumper, and other such as plastic optical fiber jumper as the transmission medium; According to the connection head structure form can be divided into: FC jumper, SC jumper, ST jumper, LC jumper, MTRJ jumper, MPO jumper, MU jumper, SMA jumper, FDDI jumper, E2000 jumper, DIN4 jumper, D4 jumper and so on various forms. Common optical fiber jumpers can also be classified into FC-FC, FC-SC, FC-LC, FC-ST, SC-SC, and SC-ST.

Optical fiber jumper according to the different transmission media can be divided into common silicon fiber single-mode, multi-mode jumper, and other such as plastic optical fiber jumper as the transmission medium; According to the connection head structure form can be divided into: FC jumper, SC jumper, ST jumper, LC jumper, MTRJ jumper, MPO jumper, MU jumper, SMA jumper, FDDI jumper, E2000 jumper, DIN4 jumper, D4 jumper and so on various forms. Common optical fiber jumpers can also be classified into FC-FC, FC-SC, FC-LC, FC-ST, SC-SC, and SC-ST.

Detailed introduction MPO category editing MPO fiber jumper is divided into conversion and non-conversion type, conversion MPO jumper variety, there are ribbon MPO jumper, bundle MPO jumper, through the branch (circular or square) fan PO jumper, generally can be converted out of 2 to 24 core 0.9 or 2.0 cable branch, connection head type specified by the customer, optional FC, LC, SC, ST and other types, MPO jumper length or branch length and other requirements are optional. All kinds of MPO fiber optic jumper, MPO conversion jumper, MTP type, MTP ten gigabit jumper, multi-mode ten gigabit jumper, MPO with branch jumper and other forms of MPO jumper products, all comply with Telcordia-GR-326, IEC standards and Rohs requirements. Application of MPO fiber jumper LAN wiring between different buildings of enterprises optical link interconnection in active equipment communication base station wiring, wiring box wiring residential area, industrial park room, commercial building room optic

OM3 ten gigabit multi-mode optical cable product features · The outer diameter of tight-sleeve fiber is uniform, and the stripping performance is good · Good flame retardant performance · Stable high and low temperature characteristics · Good consistency of optical fiber geometry · Product application · Data communication transmission · Fabrication of optical connectors · Laying method: along the wall, top, interlayer, conduit and line trough · No strict waterproof requirements · Jumper, tail fiber and indoor wiring

The fibers, 250μm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A two-sided coated plastic steel belt (PSP) is longitudinally wrapped around the loose tube. Water blocking material is added between the steel belt and the loose tube to ensure the compact and longitudinal water blocking of the cable. Two parallel steel wires are placed on both sides and then extruded into a POLYETHYLENE sheath to form the cable.

· The cable is suitable for indoor wiring. · Suitable for tail fiber jumper and jumper · Suitable for optical connection of communication equipment and optical instrument · Suitable for floor connection and convenient maintenance